How do I use the iRESTORE Pro device?Updated 7 months ago

DIRECTIONS: 

1. Position the device on your head in a comfortable position. 
2. Insert the power adapter pin into the controller. 
3. Plug the power adapter into an electrical outlet. 
4. Sit down and position the dome comfortably. 
5. Press (power) to turn on the device. (NOTE: If the (start/pause) button is not pressed within one minute, the device will turn off automatically). 
6. Press the (start/pause) button to begin the 25-minute session. A short "beep" indicates the session has started. 
7. Once the session is complete, the device will turn off automatically with a long "beep" sound. 
8. If you need to pause the session at any time, press the (start/pause) button and the timer will flash. Press the (start/pause) button to resume the session. An audible “beep” sound will indicate the session has resumed. If the (start/pause) button is not pressed within 5 minutes during a paused session, the device will turn off automatically. 
9. To turn off the device, hold the (power) button for 3 seconds. Unplug the power adapter from the electrical outlet. Pull from the plug and not the cord to avoid damaging the adapter and cord from tension. 
10. The display may remain turned on due to residual capacitance (leftover charge). It will shut off automatically after several seconds.

FREQUENCY: Use the device every other day for 25-minute sessions.